arduino-joystick/example/example.ino

// An example sketch using the joystick library, demonstrating recommended usage
// of all features.
// This code loads the sketch in debug mode. Connect to the Arduino's serial port at 115200 baud to read the output.

#include <Joystick.h>
#include <Matrix.h>
#include <Mux.h>

using namespace admux;

// Always use defines to match your pins to their logical wiring

// pins 2 and 3 are attached to a rotary encoder
#define ENCODER 2,3

// these buttons are attached directly to Arduino input pins
#define BTN1 4
#define BTN2 5
#define BTN3 6
#define BTN4 7

// pins 8-13 are attached to a 3x3 scanning input matrix. Pins 8-10 are the row pins, 11-13 are the column pins.
#define MATRIX1 8,11
#define MATRIX2 9,11
#define MATRIX3 10,11
#define MATRIX4 8,12
#define MATRIX5 9,12
#define MATRIX6 10,12
#define MATRIX7 8,13
#define MATRIX8 9,13
#define MATRIX9 10,13

// A multiplexer is attached to pins A1-A5
#define MUX_SIG A1 // the multiplexer's signal pin is on Analog 1
#define MUX_ADDR A2,A3,A4,A5 // the multiplexer's address pins are A2-A5, in that order

// These are 3 buttons attached to the multiplexer channels
#define MUX_BTN1 0
#define MUX_BTN2 1
#define MUX_BTN3 2


bool debug = true;
Joystick js(debug);

void setup() {
  js.Init();

  Serial.println("Adding encoder.");
  js.AddEncoder(ENCODER, ENCODER_PULSED_SPLIT);

  // Different types of button programming are available. BUTTON_PASSTHRU simply passes on the button's
  // real state, and will be the most common, but you can also change how the button works in software like so...
  Serial.println("Adding directly connected buttons.");

  // With BUTTON_PULSED, no matter how long the button stays held down, it will only send a button press for 250ms
  // then deactivate until pressed again.
  js.AddButton(BTN1, BUTTON_PULSED);

  // BUTTON_PULSED_DOUBLE_ACTION does the same thing, but sends a *second* 250ms press when the button is deactivated
  // This is great for an on-off toggle switch that should send an "event" in both directions.
  js.AddButton(BTN2, BUTTON_PULSED_DOUBLE_ACTION);

  // BUTTON_PULSED_DOUBLE_ACTION_SPLIT is just like the above, but it sends *different* button presses for the "on"
  // and "off" states.
  js.AddButton(BTN3, BUTTON_PULSED_DOUBLE_ACTION_SPLIT);

  // BUTTON_LATCHED_MOMENTARY lets you turn a momentary pushbutton into a toggle switch.
  // One press will "press and hold" the button. The next press releases the button.
  js.AddButton(BTN4, BUTTON_LATCHED_MOMENTARY);
  
  // One way to get more room for inputs is to use a scan matrix.
  // See http://blog.komar.be/how-to-make-a-keyboard-the-matrix/ for a very detailed discussion of how these work.
  // This is a 3x3 example, so we can get 9 buttons out of 6 inputs.
  // For faster read results, always add buttons so that buttons with the same *column* are grouped together.
  Serial.println("Adding matrix.");
  uint8_t cols[] = {11, 12, 13};
  Matrix* matrix = new Matrix(cols, 3);
  js.AddMatrixButton(MATRIX1, matrix, BUTTON_PASSTHRU);
  js.AddMatrixButton(MATRIX2, matrix, BUTTON_PASSTHRU);
  js.AddMatrixButton(MATRIX3, matrix, BUTTON_PASSTHRU);
  js.AddMatrixButton(MATRIX4, matrix, BUTTON_PASSTHRU);
  js.AddMatrixButton(MATRIX5, matrix, BUTTON_PASSTHRU);
  js.AddMatrixButton(MATRIX6, matrix, BUTTON_PASSTHRU);
  js.AddMatrixButton(MATRIX7, matrix, BUTTON_PASSTHRU);
  js.AddMatrixButton(MATRIX8, matrix, BUTTON_PASSTHRU);
  js.AddMatrixButton(MATRIX9, matrix, BUTTON_PASSTHRU);
  
  // another way to get more room for our inputs, this code adds a 16-channel multiplexer.
  // It only attaches 3 buttons, but could attach up to channel 15.
  Serial.println("Adding multiplexer.");
  Mux* mux = new Mux(Pin(MUX_SIG, INPUT_PULLUP, PinType::Digital), Pinset(MUX_ADDR));
  js.AddMuxButton(MUX_BTN1, mux, BUTTON_PASSTHRU);
  js.AddMuxButton(MUX_BTN2, mux, BUTTON_PASSTHRU);
  js.AddMuxButton(MUX_BTN3, mux, BUTTON_PASSTHRU);
  
  Serial.println("Example joystick fully configured.");
}

void loop() {
  // check all the button states and send any changes
  js.Update();
}