Refactor the increasingly complex wifi code into its own header, update some docs.

Makefile

@@ -6,7 +6,7 @@ UPLOAD_PORT ?= /dev/ttyUSB0
 all: build
 
 build:
-	arduino-cli compile -b ${BOARD_NAME} smartswitch.ino
+	arduino-cli compile -b ${BOARD_NAME} ${PWD}
 
 upload:
-	arduino-cli upload -b ${BOARD_NAME} -p ${UPLOAD_PORT} smartswitch.ino
+	arduino-cli upload -b ${BOARD_NAME} -p ${UPLOAD_PORT} ${PWD}

readme.md

@@ -37,7 +37,7 @@ only be high for a short time. 1 is for latched mode; the pin will stay high unt
 
 ## Building
 
-**TODO**
+Just run `make` to build the code. You need to have `config.h` and `data/ca_cert.pem` defined.
 
 
 ## Webhook data
@@ -49,3 +49,9 @@ The webhook should always return a page in the following (JSON-compatible) forma
 
 Where index and state are both integers. If you are expecting momentary input, you should return the
 state to '0' after the page is served / the webhook is consumed.
+
+
+## Future Improvements
+
+* make it actually work...
+* use WifiManager?

smartswitch.ino

@@ -1,6 +1,5 @@
 #include "config.h"
-#include <ESP8266WiFi.h>
-#include <ESP8266HTTPClient.h>
+#include "wifi.h"
 #include <ArduinoJson.h>
 
 // how long to delay between each request to the
@@ -18,32 +17,20 @@ const int OLD_HIGH = 255;
 // Holds the current state of all the pins.
 // Gets written to by parse_webhook_response().
 // Gets read from by set_pins().
-int pin_states[sizeof(PIN_MAP)] = {0};
-
-// Just a static client object to avoid memory allocations.
-HTTPClient client;
+int pin_states[NUM_PINS] = {0};
 
 void init_serial() {
   Serial.begin(9600);
 }
 
-void init_wifi() {
-  Serial.println("Attempting to (re)connect to wifi");
-  WiFi.disconnect();
-  WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
-  int elapsed = 0;
-  while (WiFi.status() != WL_CONNECTED) {
-      Serial.print("Wifi connecting for ");
-      Serial.print(elapsed);
-      Serial.println(" seconds");
-      elapsed++;
-      delay(1000);
+void init_pins() {
+  for (int i = 0; i < NUM_PINS; i++) {
+    digitalWrite(PIN_MAP[i][0], LOW);
   }
-
-  Serial.println("Wifi connected");
 }
 
 void setup() {
+  init_pins();
   init_serial();
   init_wifi();
 }
@@ -61,23 +48,40 @@ void loop() {
 // wait the agreed upon delay and then turn them off.
 // if any momentary data input went low, we "reset"
 // the pin.
+//
+// returns the time spent delaying, if any.
 int handle_momentary() {
-  for (int i = 0; i < sizeof(pin_states); i++) {
+  bool need_delay = false;
+  for (int i = 0; i < NUM_PINS; i++) {
     // if [the pin is momentary] and [it was set high this cycle]
     if (PIN_MAP[i][1] == 0 && pin_states[i] == HIGH) {
-      // wait for the specified amount of time, then set the pin
-      // back to low.
-      delay(MOMENTARY_PERIOD);
+      need_delay = true;
+      break;
+    }
+  }
+
+  if (!need_delay) {
+    return 0;
+  }
+
+  delay(MOMENTARY_PERIOD);
+
+  for (int i = 0; i < NUM_PINS; i++) {
+    // if [the pin is momentary] and [it was set high this cycle]
+    if (PIN_MAP[i][1] == 0 && pin_states[i] == HIGH) {
+      // set the pin back to low and make it 'sticky' until we read a low again.
       digitalWrite(PIN_MAP[i][0], LOW);
       pin_states[i] = OLD_HIGH;
     }
   }
+
+  return MOMENTARY_PERIOD;
 }
 
 // poll_server makes the actual HTTP request and handles
 // the result. It returns false if an error occurred.
 bool poll_server() {
-  client.begin(WEBHOOK_URL);
+  client.begin(transport, WEBHOOK_URL);
   int status = client.GET();
   if (status < 0) {
     Serial.print("Client error communicating with server: ");
@@ -94,20 +98,6 @@ bool poll_server() {
 }
 
 void parse_webhook_response(String raw_data) {
-  // int data[sizeof(PIN_MAP)] = {-1};
-  // // TODO: split the data and turn it into numbers
-
-  // while (raw_data.length() > 0) {
-  //   // read to a newline
-  //   String line = raw_data.substring(0, raw_data.indexOf('\n'));
-  //   raw_data.remove(0, raw_data.indexOf('\n') + 1);
-
-  //   // extract data from the line and add it to our incoming data array
-  //   int index = line.substring(0, raw_data.indexOf(' ')).toInt();
-  //   int state = line.substring(raw_data.indexOf(' ')+1).toInt();
-  //   data[index] = state;
-  // }
-
   StaticJsonDocument<256> doc;
   DeserializationError err = deserializeJson(doc, raw_data);
 
@@ -127,14 +117,14 @@ void parse_webhook_response(String raw_data) {
     i++;
   }
 
-  if (data.size() < sizeof(pin_states) / sizeof(*pin_states)) {
+  if (data.size() < NUM_PINS) {
     Serial.println("Did not receive data for all pins.");
   }
 }
 
 // Uses the current pin_states to actually write to the pins
 void set_pins() {
-  for (int i = 0; i < sizeof(PIN_MAP); i++) {
+  for (int i = 0; i < NUM_PINS; i++) {
     if (tripped(i)) {
       continue;
     }

wifi.h

@@ -0,0 +1,60 @@
+#include <ESP8266WiFi.h>
+#include <ESP8266HTTPClient.h>
+//#include <WifiClientSecureBearSSL.h>
+#include <bearssl.h>
+#include <FS.h>
+
+HTTPClient client;
+BearSSL::WifiClientSecure *transport;
+BearSSL::X509List cert_list;
+
+void init_wifi() {
+  transport = new WifiClientSecure();
+
+  Serial.println("Attempting to (re)connect to wifi");
+  WiFi.disconnect();
+  WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
+  int elapsed = 0;
+  while (WiFi.status() != WL_CONNECTED) {
+      Serial.print("Wifi connecting for ");
+      Serial.print(elapsed);
+      Serial.println(" seconds");
+      elapsed++;
+      delay(1000);
+  }
+
+  Serial.println("Wifi connected");
+  
+  sync_time();
+  load_ca_cert();
+}
+
+void load_ca_cert() {
+  // read cert from file
+  if (!SPIFFS.begin()) {
+    Serial.println("Failed to mount file system.");
+    return
+  }
+
+  File cert = SPIFFS.open("/ca_cert.pem", "r");
+  if (!cert) {
+    Serial.println("Couldn't open cert file.");
+    return;
+  }
+
+  cert_list.append(strdup(cert.readString().c_str()));
+  netClient->setTrustAnchors(&certList);
+}
+
+void sync_time() {
+  // sync time
+  Serial.print("Syncing time");
+  configTime(8 * 3600, 0, "pool.ntp.org", "time.nist.gov");
+  time_t now = time(nullptr);
+  while (now < 8 * 3600 * 2) {
+    delay(500);
+    Serial.print(".");
+    now = time(nullptr);
+  }
+  Serial.println("");
+}